This BMS is designed for battery packs for the inverter, electric bicycles and the electric motorcycles It can be applied to
lithium batteries with different chemical properties, such as lithium ion, Li-polymer. Lithium iron phosphate, etc. The protection board has strong loading capacity and the maximum continuous discharge current can reach 200A
● 3-30 cell series protection
● Various protection functions for charging and discharging
● Discharge over current, short circuit protection functional processes of hardware
● reserves the discharging control switch and the position of discharging temperature protection,
● Very low static current consumption
● Containing charging equalization function
Advantages:
1. Intelligent and powerful MOS, imported IC, integrated solution.
2. Equipped with temperature sensor, preserved control switch.
3. Factory sales, the more the quantity, the lower the price.
4. Support customization (the size of PCB / the material and length of balance wires and output line / the replacement of Aluminum shell material / change parameters / increase function of data storage )
Protection function description
Overcharge protection:
When the battery is under the charging state, the voltage keeps going up. When the protection board detects that the voltage of any cell is higher than the overcharge protection value, the protection board will start timing immediately.When the time reaches the overcharge protection delay, the protection board will turn off the charging MOS tube, at that time, it cannot be charged.
Overcharge protection recovery:
After the over voltage protection appears on the protection board, the battery voltage will going
down under the static or discharge state of the battery. When the protection board detects that each voltage is lower than the recovery voltage of the overcharge protection, the protection board will output a signal and turn on the charging MOS tube to charge.
Over-discharge protection:
When the battery is under the discharge state, the voltage keeps going down. When the protection board detects that the voltage of any cell is lower than the overcharge protection value, the protection board will start timing immediately. When the time reaches the over discharge protection delay, the output signal of the protection board will turn off the discharge MOS tube, the load lock circuit will work, but, it cannot discharge at this time.
Over discharge protection recovery:
After the over discharge protection appears on the protection board, the battery voltage will
going up under the static or discharge state of the battery. When the protection board detects that each voltage is higher than the recovery voltage of the over discharge protection. At this time, disconnect the load or charge, the protection board will output a signal and turn on the charging MOS tube to charge.
Over current protection:
When the battery is under the static or discharge state, the current suddenly increases. When the protection board detects that the current reaches the overcurrent protection value, the protection board will start timing at that time. When the current duration in the circuit reaches the over current protection delay time, the output signal of the protection board will turn off the discharge MOS tube, and the load lock circuit will work. At this time, the discharge cannot be conducted.
Over current protection recovery:
After the discharge over current protection appears on the protection board, the discharge MOS tube is turned off, and the current in the loop becomes 0. At this time, the load is disconnected or charged, the output signal of the protection board will turn on the discharge MOS tube to discharge.
Items
Min.
Max.
Unit
Description
Working humidity
-20
+70
℃
Normal working temperature range
Storage temperature
-40
+85
℃
Humidity
Continuous discharge current
200A
Discharge over current protection
2~3 times of continuous discharge current
+70
℃
Normal working temperature range
Mosfet
<10mΩ
Charge current
200A
Charge voltage
Lifepo4 battery:series*3.65V Li ion battery: series*4.2V
Over charge protection:
Balance voltage:
Detection voltage: Lifepo4: 3.75±0.05V Li ion: 4.25±0.05V
Start voltage: Lifepo4: ≥3.5V Li ion: ≥4.18V
Detection delay time: 500~1500mS
Recovery voltage: Lifepo4: <3.5V Li ion: <4.18V
Recovery voltage: Lifepo4: 3.55±0.05V Li ion: 4.15±0.05V
Balance current: 22-33mA
Over discharge protection:
Over current protection:
Detection voltage: Lifepo4: 2.2±0.1V Li ion: 2.7±0.1V
Detection current: 2~3 times of continuous discharge current
Detection delay time: 4000~6000mS
Detection delay time: 500~1500mS
Recovery voltage: Lifepo4: 2.7±0.1V Li ion : 3.0±0.1V
Recovery condition: disconnect charger
Short protection:
Temperature protection
Trigger condition: exterior load short circuit
Charge discharge high temperature protection: 75±5℃